July 3, 2022

tacere

Beauty Made Perfect

A DIY batten wall behind brass vintage sconces above a green banquette bench

Inexpensive DIY Batten Wall Using Lattice Strips


Tutorial: How to use lattice strips as an effortless, economical substitute to set up a Do-it-yourself batten wall for incorporating vintage character to basic partitions.

Lattice strips are the MVP of this Do-it-yourself batten wall task!

I necessarily mean they truly are the unsung hero of a good deal of little DIYs and crafts close to listed here. (Bear in mind that shower curtain art we framed with lattice strips a although again?) This time it desired a spotlight in the breakfast nook.

A DIY batten wall behind brass vintage sconces above a green banquette bench

Due to the fact we sort of have an dependancy to intricate wall molding around here, it is definitely no surprise at all that soon after we completed putting in and portray our Facebook Market banquette find in the breakfast nook, Robert and I appeared at just about every other and stated, “Something’s missing.”

These smooth walls wanted character! And lattice could do the position inexpensively. Mainly because molding is 1 of my favored approaches to make a house glance lavish.

A breakfast nook with olive green banquette, herringbone floors, white walls, and black bifold French door

What is Lattice?

Lattice is manufactured of thin strips of wooden most normally employed in a criss-cross construction for trellises to guidance climbing plants in gardens or to serve as porch skirting.

But it’s great for simple wall molding jobs much too. (Form of like Sharpie shiplap but way far more legit.)

The cost of molding has skyrocketed recently (together with just about every other residence improvement provide), so we figured out a way to incorporate dear on the lookout batten wall molding for the fraction of the selling price employing helpful dandy lattice strips at $1.28 for every linear foot.

If you’ve in no way mounted any variety of molding in advance of, it’s the best novice model to attempt since it needs no miter cuts and lattice can sit flush correct on best of your existing baseboards due to the fact they’re thinner than common 1×2 boards.

a stack of lattice strips

How to Make a Batten Wall Using Lattice Strips

You could include this vertical batten wall all all over the space, as wainscoting, or just as a board and batten accent wall. You could depart your partitions basic without any wall decor for a minimalist tactic or layer it with artwork for even more character.

It would be great for adding on to a simple kitchen area island as well. Continue to keep in mind though, if you have a textured wall, the course of action will not be as simple, because you will have to have to insert these MDF panels to your textured partitions applying Liquid Nails and brad nails to start with.

Provides

Measures to Make a Batten Lattice Wall

measuring a wall to place lattice strips for a DIY batten wall

Action 1 – Evaluate and Make your mind up on a Structure

Evaluate your full wall initially, determine how significantly apart you want your batten (vertical lattice strips) to be, and mark their placement on the wall with a pencil.

Bear in mind that lattice strips are 1 1/2″ wide, so variable that into your layout prepare. We set our battens to have an 8 1/2″ gap in between.

Stage 2 – Minimize Lattice Duration

Measure the height of your wall from baseboard to crown and slice the initially lattice strip to the essential duration with a jigsaw. (Not all partitions will be perfectly the exact same top all the way across, so really do not slash all of your lattice primarily based on that to start with measurement.)

checking with a level to make sure lattice strips are perpendicular

Stage 3 – Use a Degree to Check out Lattice Placement

“Dry fit” the very first lattice strip and use a degree to make certain it’s correctly straight.

Step 4 – Nail Lattice

When you are satisfied with the lattice strip placement, nail it to the wall with the brad nailer (or a hammer).

You can use building adhesive below as nicely, if you opt for, but since the lattice is so lightweight, it’s completely optional. (The batten wall will also be easier to clear away with no adhesive later if a single working day you transform your brain.)

installing lattice strips for wall molding by dry fitting

Move 5 – Repeat

Repeat Techniques 2-4 right up until you have positioned all lattice strips together the wall.

nailing lattice strips to a wall for DIY batten wall molding

Phase 6 – Caulk Cracks and Wood Fill Nail Holes

Caulk all of the edges of the lattice strips to fill all of the cracks, and fill all of the nail holes with wooden filler.

caulking and wood filling lattice strips

Step 7 – Sand Wood Filler

Once the wood filler is entirely dry, sand clean with fantastic grit sandpaper (we use an orbital sander to make the process go faster). Brush absent any sanding dust following.

batten wall after caulking, wood filling, and sanding smooth before painting

Phase 8 – Paint

Give all the things a fresh new coat of paint and you’re completed! (We painted the wall initially with the identical color we prepared to use on the lattice strips so that we wouldn’t have to perform all-around all of the particulars afterwards.)

batten wall painted white with brass vintage style sconces and green banquette

The Completed Batten Wall

Never you consider these two batten walls add so a great deal to this small breakfast nook corner? I love it so considerably!

We additional these vintage fashion sconces to convey more light into this windowless space. What do you think?!

They get the job done so effectively with this linear chandelier that provides a touch of modern, and the brass pops against that batten wall we painted Benjamin Moore Chantilly Lace.

breakfast nook with green banquette bench, white batten wall made of lattice strips, and brass lighting

Wrapping Up Breakfast Nook Particulars

I nonetheless system to paint the air vent and incorporate knobs to the banquette cabinet doors.

(Now that it is dry, I have to acknowledge, never love the paint I experienced to use on the banquette many thanks to source chain issues creating my favored cupboard paints to be sold out. But oh properly. If which is our greatest problem, I’ll consider it.)

I just got the call this week that the freshly reupholstered cushions are concluded! So it will all be coming with each other in listed here quickly.

These Do it yourself herringbone LVP flooring continue to look completely incredible since we installed them a few weeks in the past! Following on the checklist is developing a table, refinishing some secondhand eating chairs for the other side, and introducing some classic art and decor finds.

It will be so charming as we wrap up the remaining information.

olive green banquette bench in a breakfast nook with white batten, herringbone floors, and black door

Have you ever carried out a Do it yourself batten wall in advance of? Or found a new use for lattice strips? They’re the very best for so lots of factors!

Extra Challenge Suggestions Making use of Lattice Strips

If you want much more wall molding thoughts, in this article are a couple of additional much too.

Additional Do it yourself Wall Molding Concepts

signoff



Supply website link